Product highlights:

Features:

• 200 watts per channel into 8 ohms (20-20,000 Hz) at <1% THD
• 400 watts per channel into 4 ohms (20-20,000 Hz) at <1% THD
• 550 watts per channel into 2 ohms (20-20,000 Hz) at <1% THD
• 2-ohm capability allows use with a wide range of speakers
• signal-to-noise ratio: 120 dB
• large precision-wound triple-shielded toroidal transformer with oversized filter capacitors for stable, noise-free operation
• Advanced Load Monitoring (ALM) circuitry constantly monitors the amp's temperature, current, and voltage to ensure optimum long-term performance
• ARC (Anthem Room Correction) Genesis speaker calibration kit (software, USB microphone, and telescopic stand with boom included)
• ARC software requires a Mac® or Windows®-based laptop
• free ARC Mobile app allows you to run ARC from compatible iOS® devices
• premium 32-bit/384kHz differential-output digital-to-analog converter
• Connections:
• digital audio inputs: 2 Toslink optical and 2 coaxial (supports PCM audio up to 24-bit/192kHz)
• USB (Type B) input for connection to a computer (supports PCM audio sources up to 32-bit/384kHz, DSD 2.8 and 5.6 MHz
• if using a Windows PC, a USB DAC driver must first be downloaded from Anthem's website and installed
• AES/EBU digital audio input with balanced XLR connection
• 4 sets of unbalanced stereo RCA inputs
• 2 phono inputs for connecting a turntable (one for use with moving-magnet cartridges, one for moving-coil cartridges)
• set of balanced stereo XLR inputs for connecting a compatible source
• fixed-level stereo RCA preamp outputs for connecting a headphone amp or recording device
• dual stereo RCA subwoofer outputs (selectable mono or stereo operation)
• built-in bass management, in conjunction with ARC, is uniquely engineered for seamless subwoofer blending
• custom-designed binding post speaker connectors
• Ethernet port for Anthem Room Correction, software installation, and control
• lets you operate the receiver from a web browser control screen on a PC connected to your home network
• rear-panel USB Type A port (factory use only)
• rear-panel USB mini B port for software installation and ARC via PC
• RS-232 input, remote (IR) input and 12 volt-trigger output for use with external controllers
• If connecting to a TV, please make sure you can select "PCM" output in its audio menu — the preamp's DAC cannot decode multichannel Dolby® Digital signals
• General:
• remote control
• detachable power cable
• designed, engineered and manufactured in Canada
• 17"W x 6-13/16"H x 17-9/16"D
• weight: 40 lbs.